PWM Inline Dimmer with RF keychain remote
~~0-100% Dimming of Single Color Flex Strip
~~RF wireless keychain remote control to turn on/off and dim your flexible LED strips (this can go through walls).
~~Input: Push terminals for easy connection to our male barrel plug or stripped power supply wires.
~~Output: Push terminals for easy connection to our single color flexible LED strips
~~Requires 12V DC input
~~8A or 96W of power for up to 50' of flex strip (this recommendation is based on the rated capacity. You should be able to run longer lengths based on the actual capacity, but we don't guarantee it).
Please visit our How To Install section for instructions on connecting to or from this controller or any of our other products.
|Mounting Options||Double Sided Tape, Under Cabinet, Other|
|Power Usage in Off or Standby State||less than 1w|
|Output Power||8A 96 Watts Total|
|Number Of Chanels||1|
|Recommended Power Supply Size||1-8 Amp (12-96 Watts)|
|Power Input: Connection Type, Voltage, Amperage||Push Terminal|
|Output Connection Type||Push Terminal|
|Can Power/Control (xx) Feet of strip||Up to 64' of Single Color Flex Strip|
|Controllable By||3 Button RF Keychain Remote|
|Number Of Control Modes||On/Off Bright/Dim|
|Steps of Speed Adjustment||256 Steps|
|Dimmable Range / Steps||0-100% via PWM|
|Product Size (L)x(W)x(H)||(L) 4.5" x (W) 2.25" x (H) 1.5" in|
|Comes With||Reciver, Remote and Battery|
|Suggested Accessories||Male Barrel Plug (to connect to out power supplies)|
|Available Options (may not be in stock)||with a different frequency for using more then 1 in the same area|