Welcome To usLEDsupply!

RGB Remote Control 2A (44x Button IR Remote/Controller)

Be the first to review this product

Availability: In stock

Regular Price: $30.00

Sale Price $20.00

  • Buy 50 for $15.00 each and save 25%
OR

Quick Overview

RGB Remote Control

RGB Remote Control 2A (44x Button Remote) with IR receiver

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • RGB Remote Control 2A (44x Button Remote) with IR receiver
  • RGB Remote Control 2A (44x Button Remote)
  • RGB Remote Control 2A (44x Button Remote)

Details

RGB Remote Control 2A (44x Button Remote)
This RGB remote control is perfect for anyone who loves lots of options in addition to programmable buttons! 
It can control up to 32 feet of our 12V RGB flexible LED strip (2A/Ch and 24W).  The power input is 12V DC and fits a barrel plug 5.5mm by 2.1mm (our transformers and Female Power Connectors plug right into this controller).  In addition, there are 8 steps of dimming control in normal mode and full 0-100% in DIY mode.  It can be used with amplifiers to control more than 2 reels (2x 5m) of our RGB flex strip. 
Please see our How To Install section for instructions on connecting to or from this controller.

 

Here are some actual power usage measurements using a Kill-A-Watt Meeter
This is using our 4A 48w Power Supply connected to the IR 44key Remote with 1x Reel (16ft) of RGB Flex Strip connected to it measured by one of our customers Garrett Bartley

Red = 10 W
Orange = 13 W
Dark Yellow = 16 W
Yellow = 20 W
Light Yellow = 24 W

 

Green = 14 W
Light Green = 16 W
Cyan = 18 W
Light Blue = 15 W
Sky Blue = 16 W

 

Blue = 14 W
Dark Blue = 16 W
Lyons Blue = 18 W
Purple = 21 W
Brown = 23 W

 

White = 27 W
Milk White = 25 W
White Pink = 22 W
Green White = 22 W
Blue White = 22 W

Additional Information

Suggested Uses

This IR remote has lots of features and is easy to use.  Perfect for someone who wants it all!
Working temperature:-20-60 ℃

Led Color RGB
Mounting Options Other
Voltage 12v
Wattage 24W/Ch
Power Usage in Off or Standby State Less than 1W
Power Rating Max Amps 2A/Ch
Power Rating Max Watts 72 Watts
Output Power 6A 72 Watts Total
Number Of Chanels 3
Rated Amps / Ch 2A/Ch
Recommended Power Supply Size 1-6A (12-72 Watt)
Connections Input/Output

Input: Use our barrel plug 12V DC (our power supplies plug into this port) or our female barrel plug for connecting to 12v DC car, truck, motorcycle, and boat batteries.

IR Receiver: The receiver is on a cord so that it can be placed in view even if the receiver is behind doors.

Output: Has 4-Pin jack for connecting to our RGB Flex Strips (you can solder our 4-Pin connector to the strip and plug in this remote).

 

Note: Ensure short circuit can not occur between connecting wire before you turn on the power

Power Input: Connection Type, Voltage, Amperage Barrel Plug 12V DC
Output Connection Type 4-Pin Jack for our 4-Pin Connectors
Can Power/Control (xx) Feet of strip Can control 32' of our 12V RGB Flex Strip.
Controllable By IR Remote (infrared remote - like a TV remote it does not go through walls)
Number Of Control Modes 44 Buttons
Mode/Button Decription

The key-press functions are shown in the table below (in accordance with the key position order):

Brightness rise
(a total of eight steps)
(will adjust pink squares)

Brightness fall
(a total of eight steps)
(will adjust pink squares)

Pause/Run
(Will pause fade or flash to stay on that color)

On/Off

Red

Green

Blue

White

Orange

Light green

Dark blue

Milk white

Dark yellow

Cyan

Lyons blue

White pink

Yellow

Light blue

Purple

Green white

Light yellow   

Sky blue

Brown

Blue white

Increase Red

Increase Green

Increase Blue

Speed up
(Will adjust Light Blue squares)

Decrease Red

Decrease Green

Decrease Blue

Speed down
(Will adjust Light Blue squares)

DIY key1

DIY key2

DIY key3

Automatic change
(cycles threw fade/flash modes)

DIY key4

DIY key5

DIY key6

White strobe

3 color jumping change

7 color jumping change

3 color fading change

7 color fading change

 

The DIY (do it yourself) key, when pressed for the first time, will enter the DIY color mode.  You can adjust each individual color brightness with the 6 keys shown above.  However, if another key is pressed it will jump out of DIY color mode without saving your settings.  In order to save the color which you have just created, you must press the same DIY key which you originally selected once again within 5sec.  The next time this key is pressed, it will display the color which you saved the last time.  There are 6 DIY keys, so you can save your favorite 6 colors/brightnesses.

Dimmable Range / Steps 8x steps of dimming control in normal mode and full 0-100% in DIY mode
Product Size (L)x(W)x(H) (Receiver L63ΧW35ΧH22 mm) (Remote L125ΧW56ΧH7mm)
Comes With Remote Control and Receiver
Suggested Accessories Can be used with amplifiers to control more than 2x reels (10 meters) of RGB flex strip
Available Options Available in 6, 12, or 24V

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.