RGB Remote Control 24-Key
~~This remote is great for inexpensive simple color control of our RGB flexible LED strips.
~~8x steps of dimming control.
~~2A/Ch 24W (can control 32' of our 12V RGB flex strip).
~~Power input: 12V DC (Male Barrel plug 5.5mm x 2.1 ~ our power supplies plug right into this controller).
~~Can be used with amplifiers to control more than 2x rolls (5M) of RGB flexible LED strip.
To watch a basic video of this controller Click Here
Please visit our How To Install section for instructions on connecting to and from this controller or for information on any of our other products.
Great for inexpensive simple color control of our RGB Rope Light
If you need the IR Code Files contact us and we can email you the HEX, Crestron or Global Catch IR Files
|Power Usage in Off or Standby State||less than 1w|
|Number Of Chanels||3|
|Rated Amps / Ch||2A/Ch|
|Recommended Power Supply Size||1-6A (12-72 Watt)|
Input: Barrel Plug 12V DC (our power supplies plug into this port) or use our Female Barrel Plug for connecting to 12v DC Car, Truck, Motorcycle, Boat or Batteries
IR Receiver: The receiver is on a cord so it can be placed in view even if the receiver is behind doors
Output: Has 4-Pin jack for connecting to our RGB Flex Strips (you can solder our 4-Pin connector to the strip and plug in this remote)
Note: Ensure short circuit can not occur between connecting wire before you turn on the power
|Power Input: Connection Type, Voltage, Amperage||Barrel Plug 12V DC|
|Can Power/Control (xx) Feet of strip||Can control 32' of our 12V RGB Flex Strip.|
|Controllable By||IR Infrared Remote (like a TV remote it does not go through walls)|
|Number Of Control Modes||24 Buttons|
|Dimmable Range / Steps||8x steps of dimming control|
|Comes With||Remote Control and Receiver|
4-Pin Connector for connecting to strips
Can be used with amplifiers to control more than 2x reels (10 meters) of RGB flex strip
|Available Options||can get in 6/12/24v|