RGB Remote Control 2A (44x Button Remote)
This RGB remote control is perfect for anyone who loves lots of options in addition to programmable buttons!
It can control up to 32 feet of our 12V RGB flexible LED strip (2A/Ch and 24W). The power input is 12V DC and fits a barrel plug 5.5mm by 2.1mm (our transformers and Female Power Connectors plug right into this controller). In addition, there are 8 steps of dimming control in normal mode and full 0-100% in DIY mode. It can be used with amplifiers to control more than 2 reels (2x 5m) of our RGB flex strip.
Please see our How To Install section for instructions on connecting to or from this controller.
Here are some actual power usage measurements using a Kill-A-Watt Meeter
This is using our 4A 48w Power Supply connected to the IR 44key Remote with 1x Reel (16ft) of RGB Flex Strip connected to it measured by one of our customers Garrett Bartley
Red = 10 W
Orange = 13 W
Dark Yellow = 16 W
Yellow = 20 W
Light Yellow = 24 W
Green = 14 W
Light Green = 16 W
Cyan = 18 W
Light Blue = 15 W
Sky Blue = 16 W
Blue = 14 W
Dark Blue = 16 W
Lyons Blue = 18 W
Purple = 21 W
Brown = 23 W
White = 27 W
Milk White = 25 W
White Pink = 22 W
Green White = 22 W
Blue White = 22 W
This IR remote has lots of features and is easy to use. Perfect for someone who wants it all!
|Power Usage in Off or Standby State||Less than 1W|
|Power Rating Max Amps||2A/Ch|
|Power Rating Max Watts||72 Watts|
|Output Power||6A 72 Watts Total|
|Number Of Chanels||3|
|Rated Amps / Ch||2A/Ch|
|Recommended Power Supply Size||1-6A (12-72 Watt)|
Input: Use our barrel plug 12V DC (our power supplies plug into this port) or our female barrel plug for connecting to 12v DC car, truck, motorcycle, and boat batteries.
IR Receiver: The receiver is on a cord so that it can be placed in view even if the receiver is behind doors.
Output: Has 4-Pin jack for connecting to our RGB Flex Strips (you can solder our 4-Pin connector to the strip and plug in this remote).
Note: Ensure short circuit can not occur between connecting wire before you turn on the power
|Power Input: Connection Type, Voltage, Amperage||Barrel Plug 12V DC|
|Output Connection Type||4-Pin Jack for our 4-Pin Connectors|
|Can Power/Control (xx) Feet of strip||Can control 32' of our 12V RGB Flex Strip.|
|Controllable By||IR Remote (infrared remote - like a TV remote it does not go through walls)|
|Number Of Control Modes||44 Buttons|
The key-press functions are shown in the table below (in accordance with the key position order):
The DIY (do it yourself) key, when pressed for the first time, will enter the DIY color mode. You can adjust each individual color brightness with the 6 keys shown above. However, if another key is pressed it will jump out of DIY color mode without saving your settings. In order to save the color which you have just created, you must press the same DIY key which you originally selected once again within 5sec. The next time this key is pressed, it will display the color which you saved the last time. There are 6 DIY keys, so you can save your favorite 6 colors/brightnesses.
|Dimmable Range / Steps||8x steps of dimming control in normal mode and full 0-100% in DIY mode|
|Product Size (L)x(W)x(H)||(Receiver L63ΧW35ΧH22 mm) (Remote L125ΧW56ΧH7mm)|
|Comes With||Remote Control and Receiver|
|Suggested Accessories||Can be used with amplifiers to control more than 2x reels (10 meters) of RGB flex strip|
|Available Options||Available in 6, 12, or 24V|