RGB Waterproof Flexible LED Strip
These color changing LED strips are very flexible, bright, and easy to install!
Each roll of flexible LED strip is 16' long (5 meters or actually 16'-5" with 6" wire on each end). The LED type used are the 5060 type super bright 3 in 1 LEDs. There are 150 per 16' roll. They run on 12V DC. The waterproof rating is IP-68, which means that these flexible LED strips can be completely submerged in water. You can cut these strips every 3.94" ~ they are very easy to work with!
Details / Options
~~These RGB strips can change any color with the use of a controller (please look through our RGB Remote Controllers and DMX Controllers). For these RGB Strips, we can pre-solder the RGB Remote Controller onto the strip, which would then plug into our power supplies or your 12V source (this must be requested at checkout).
~~They can be dimmed 0-100% which is a feature on most of our RGB controllers.
~~If you need help designing your lighting or are not sure how to wire, please check out our How to Install section. If your questions are not answered there, please contact us we would be glad to help!
~~The 12 watt (can control up to 5' of flexible LED strip) or 48 watt (can control up to 24' of flexible LED strip) are recommended~ these are based on the rated power draw~ you may be able to get longer runs than this on a power supply but we can not guarantee it).
These Flexible Strips Are Great For
|Length Of Strip||5 Meters/Reel 16'-4" long rolls with 6" of wire on each end|
|Cuttable Every||100mm (3.94")|
|# of LEDs / Meter||30|
|# of LEDs / Reel||150|
|Type of LED||Super Bright 3 in 1 RGB 5060 SMD|
|Mounting Options||Silicone Adhesive or Zip Ties, Car/Truck/Motorcycle/Boat|
|Waterproof Rating||Waterproof (IP-68)|
|Power Usage Watts / Foot: Rated (Actual)||Rated 2.25 Watts/Ft (Actual power usage (per foot): 1.55 Watts/Ft) @ White 100% (Red = 50mA) (Green = 55mA) (Blue = 53mA)|
|Power Usage in Amps: Rated (Actual)||Rated 3A/Roll|
|Usage in Amps: Rated (Actual) Red, Blue, Green, White||RGB=1.7 R=0.7A B=0.6A G=0.7A /Roll Power Use for 5m Reel (using 2A RGB remote controller and our 48w 12v power supply) measured with kill-a-watt meter: Red 11 watts Green 11 watts Blue 11 watts 2x Color 20 watts White 28 watts|
|Recommended Power Supply Size||1-5 Feet = 1A 12W 12V DC Power Supply 5-21 Feet = 48W 4A DC Power Supply 21-32 Feet = 72W 6A DC Power Supply For longer runs, you can stack power supplies or contact us for larger power supplies.|
|Max Connected Strip Length From Each Power Connection||at full brightness (white) we recommend you only connect 2 rolls from each power connection for accent lighting say about 25% you can connect 10x rolls end to end|
|Dimmable Range / Steps||0-100% via PWM|
|Strip Backing Color||Gold or White if needed|
|Product Size (L)x(W)x(H)||(5m)x(13.3)x(6.6) mm|
|Strip Width||.53" (13.3mm)|
|Strip Thickness||.25" (6.6mm)|
|Available Options (may not be in stock)||Available With White Backing|
|Available Options||We can get this in
(12v or 24v)
(150 or 300 led/m)
(Waterproof ip-65 ip-66 ip-67 ip-68)
(side or top emitting led)