Details
LED Motion Sensor On/Off with Adjustable Off Time 6A (Surface Mount)
This is a motion sensor to turn on/off flexible LED strips or other 12/24v devices!
This is a surface mount detector that will turn your lights on when motion is detected and keep them on for 1-10min (adjustable) after it stops seeing motion.
Note: there is no sensitivity adjustment on these but they are set right for normal use
~~Range approx 16ft (26ft large objects)
~~Delayed Off Time Adjustable from 1-10Min with Set Screw
~~Detection Angle 60 degrees
~~Input: Screw terminals for easy connection to our male barrel plug or stripped power supply wires.
~~Output: 6A Screw terminals for easy connection to our single color flexible LED strips or control cable.
~~Requires 12/24V DC input.~~If you use an 6A or 72W power supply, you can use this to control up to 35' of flex strip (This is based on the rated capacity. You should be able to run longer lengths based on the actual capacity, but we don't guarantee it).
Please visit our How To Install section for instructions on connecting to or from this controller or any of our other products.
Additional Information
Suggested Uses |
Hallways
|
---|---|
Led Color | N/A |
Mounting Options | Wall Mount |
Voltage | 12/24v |
Wattage | 72 max |
Power Rating Max Amps | 6A |
Number Of Chanels | 1 |
Power Input: Connection Type, Voltage, Amperage | Screw Terminal |
Output Connection Type | Screw Terminal |
Can Power/Control (xx) Feet of strip | 35 |
Product Size (L)x(W)x(H) | (L) 3" x (W) 1-3/8 / 2" x (H) 1-3/8" in (L=76 x W=45 x H=35.5mm) |