LED Motion Sensor On/Off 8A (Surface Mount)
This is a motion sensor to turn on/off flexible LED strips or other 12v devices!
This is a inexpensive surface mount detector that will turn your lights on when motion is detected and keep them on until about 10 seconds after it stops seeing motion.
Note: there is no sensitivity adjustment on these so for small areas you may have to diffuse them to avoid false readings
~~Range approx 25ft
~~Detection Angle 120 degrees
~~Input: Screw terminals for easy connection to our male barrel plug or stripped power supply wires.
~~Output: Screw terminals for easy connection to our single color flexible LED strips or control cable.
~~Requires 12V DC input.~~If you use an 8A or 96W power supply, you can use this to control up to 50' of flex strip (This is based on the rated capacity. You should be able to run longer lengths based on the actual capacity, but we don't guarantee it).
Please visit our How To Install section for instructions on connecting to or from this controller or any of our other products.
note: there is no sensitivity adjustment on these so for small areas you may have to diffuse them
|Mounting Options||Wall Mount|
|Number Of Chanels||1|
|Product Size (L)x(W)x(H)||(L) 3.5" x (W) 2.4" x (H) 1-3/4" in (L=89 x W=60 x H=44.5mm)|