RGB Remote Control RF 4A (20x Button Remote)
~~This RGB remote control is perfect for anyone who loves lots of options and also a convenient, simple design. This remote is very easy to use- and unlike the IR remote, you do not have to point this remote at the receiver.
~~This remote can control up to 64 feet of our 12V RGB flexible LED strip (4A/Ch and 48W). The power input is 12V DC and has dual inputs: barrel plug 5.5mm by 2.1mm (our transformers plug right into this controller) and a Terminal strip for standard wires. In addition, there are 100 steps of dimming control. It can be used with amplifiers to control more than 4 reels (4x 5m) of our RGB flex strip.
Please see our How To Install section for instructions on connecting to or from this controller.
Click Here for a video clip of this controller
This IR remote has lots of features and is easy to use. Perfect for someone who wants it all!
|Mounting Options||Wall Mount|
|Power Usage in Off or Standby State||Less than 1W|
|Power Rating Max Amps||4A/Ch|
|Output Power||12A 192 Watts Total all channels|
|Number Of Chanels||3|
|Rated Amps / Ch||4A/Ch|
|Recommended Power Supply Size||1-12A (12-192 Watt)|
Dual Input: barrel plug 12V DC (our power supplies plug into this port) or terminal strip plug for connecting to 12v DC car, truck, motorcycle, and boat batteries.
RF Receiver: built in
Output: Has terminal strip for connecting to our RGB Flex Strips.
Note: Ensure short circuit can not occur between connecting wire before you turn on the power
|Power Input: Connection Type, Voltage, Amperage||Barrel Plug 12V DC or direct wire with termnal strip|
|Output Connection Type||Terminal strip|
|Can Power/Control (xx) Feet of strip||Can control 64' of our 12V RGB Flex Strip.|
|Controllable By||RF Remote (can go through walls) medium range (large room and 1x wall)|
|Number Of Control Modes||20 Buttons 16 mode|
The key-press functions are shown in the table below (in accordance with the key position order):
|Dimmable Range / Steps||dimming control 10 steps quick 100x steps fine|
|Product Size (L)x(W)x(H)||(Receiver L114ΧW64ΧH25 mm) (Remote L84ΧW52ΧH7mm)|
|Comes With||Remote Control, Receiver and battery|
Can be used with amplifiers to control more than 4x reels (20 meters) of RGB flex strip
Remote Battery Type: (27A 12V Battery) or (for old style remote (pre 2011) takes CR2025 Battery)
|Available Options (may not be in stock)||Available in 6v|