Solder-less Single Color Splice Connector (Strip-Screw Terminal)
~~This connector is great for easily making a solder-less connection to our single color flexible LED Strips.
~~While soldering makes a better, more permanent connection, these are easy to use and are removable and reusable.
It doesn't get much easier than this,
Just cut the strip to the desired length at one of the cut joints and peal off any coating (if they are IP-65 or IP-68)
then insert the strip into the end with the wide slot (if you are using the 5050 size strips you may need to trim the width of the strip down a bit on both sides so it will fit) and tighten the 2 screws
then strip and insert your wires into the other end and tighten the screws and you are done
Easy to use Splice Connector For connecting to our Flex Strips after cutting.
For our waterproof strips remove 1/4" on the coating with your finger nail then trim the strip so that the contacts are exposed on the end
This is a great new Secure Connector.
Use this connector on any 8-10mm LED Light Strips. (10mm requires clipping the corners)
Just align your
Black wire with the (+) on strip
|Product Size (L)x(W)x(H)||(L) .5" x (W) .375" x (H) .375" in|