Details
RGB Flexible Digital LED Strip
These are the Digital strips that can be controlled with computers and other DMX/Digital SD Card Controllers. The advantage of digital strips is that you can control each 3.24" section by itself so you can make chasing effects and other patterns. These color changing LED strips are flexible, bright, and easy to install! They are much brighter and longer-lasting than traditional rope light.
Each roll of flexible LED strip is 16' long (actually 16'-5" or 5 meters with wire on each end). The LED type used are the 5060 type super bright 3 in 1 SMD LEDs. There are 180 per 16' roll. They run on 12V DC.
Details / Options
~~These RGB strips can change any color with the use of a controller or via DMX so you will need a SD Card Controller designed to control the 2801 chip or use standard DMX and a DMX to WS2801/WS2803 Converter.
~~If you need help designing your lighting or are not sure how to wire, please check out our How to Install section. If your questions are not answered there, please contact us we would be glad to help!
~~The 12 watt Power Supply (can control up to 6' of this flexible LED strip) or the 48 watt Power Supply(can control up to 24' of this flexible LED strip) the 72 watt (can control up to 36' of this flexible LED strip)~ these are based on the rated power draw~ you may be able to get longer runs than this on a power supply but we can not guarantee it).
~~Comes with a white backing.
For a video of the 6803 (older version) of these strips in action Click Here
Additional Information
Suggested Uses | House Outlines |
---|---|
Led Color | RGB |
Length Of Strip | 5 Meters/Reel 16'-4" long rolls |
Cuttable Every | 3.24" 82mm |
# of LEDs / Meter | 36 |
# of LEDs / Reel | 180x 5060 SMD Leds / Reel (spaced 1.08in 27mm apart on center) |
Type of LED | 5060 SMD |
Viewing Angle (Degrees) | 120 deg |
Mounting Options | Double Sided Tape, Ceiling Mount, Wall Mount |
Waterproof Rating | Un-Coated (Non waterproof) |
Voltage | 12v |
Wattage | 3 Watts Per Foot |
Power Usage Watts / Foot: Rated (Actual) | 3 Watts/Foot |
Power Usage in Amps: Rated (Actual) | 3.75A / Reel |
Number Of Chanels | each strip will use 180 (60x RGB) DMX channels |
Connections Input/Output | this will not work with our Solder-less Splice Connectors
Red = 12v (+) |
Max Connected Strip Length From Each Power Connection | With the digital strips you will need a wire running from the power supply to the start of each reel |
Controllable By | DMX 2801 Decoder or SD Card Controller Controller 2801 |
Strip Backing Color | White Backing |
Strip Width | bare strip (.48") |
Strip Thickness | .17" (4.6mm) |
Comes With | 6" wire on both ends |
Available Options | 5V Strip with every LED Controllable |