Details
RGB Manual Knob Controller 3A (3x Knob)
This RGB remote control is great if you want to be able to easily create custom colors, or want to control 3x zones of single color strips, through the use of one unit.
~~It can control up to 50 feet of our 12V RGB flexible LED strip (3A/Ch 36W).
~~The power input is 12-24V DC.
~~Has a terminal strip for input and output connections.
~~Full 0-100% dimming.
~~Can be used with amplifiers to control more than 3 rolls (3x 5m) of our RGB flex strip.
Please see our How To Install section for instructions on connecting to or from this controller.
Additional Information
Suggested Uses | This RGB remote control is for those who want to be able to easily make custom colors or want to control 3x zones of single color strips in one unit Please see our How To Install section for instructions on connecting to or from this controller. |
---|---|
Product Highlights |
It can control up to 50 feet of our 12V RGB flex strip (3A/Ch 36W). |
Led Color | RGB |
Mounting Options | Other |
Voltage | 12/24v |
Wattage | 3A/Ch |
Power Usage in Off or Standby State | Less than 1W |
Power Rating Max Amps | 3A/Ch |
Number Of Chanels | 3 |
Rated Amps / Ch | 3A/Ch |
Recommended Power Supply Size | 1-9A (12-108 Watt) |
Connections Input/Output | Input: Terminal Strips Output: Terminal Strips
Note: Ensure short circuit can not occur between connecting wires before you turn on the power |
Power Input: Connection Type, Voltage, Amperage | Terminal Strips |
Output Connection Type | Terminal Strips |
Can Power/Control (xx) Feet of strip | Can control 50' of our 12V RGB Flex Strip. |
Number Of Control Modes | 0 |
Dimmable Range / Steps | Full 0-100% |
Product Size (L)x(W)x(H) | (L) 5.2" x (W) 1.6" x (H) 2.1" in 130×40×52 (mm) |
Suggested Accessories | Can be used with amplifiers to control more than 3x reels of RGB flex strip |
Available Options | Sliders instead of Knobs |