Details
RGB Flex Strip Controller (this controller has lots of options and has a RF remote so it can go threw walls)
4A/Ch 48W/Ch (can control 64' of our 12v RGB Flex-Strip)
Input: screw terminals for easy connection to our male barrel plug or striped power supply wires
Output: screw terminals for easy connection to our RGB Flex Strips or control cable
You can connect and control up to 4A/Ch of output (4x rolls of our RGB Flex Strip)
Supports PWM (Pulse-Width-Modulation) Control 0-100% Dimming / Full Color Control
Full Range Dimming Control
can be used with amplifiers to control more then 4x reel (5M) of RGB Flex Strip
for instructions on connecting to or from this controller or any of our other products visit our How To Install section
the brightness is adjustable in 256x steps
the speed is adjustable in 100x steps
25 Multi Mode Controller
01 Static Red (Brightness is Adjustable)
02 Static Blue (Brightness is Adjustable)
03 Static Purple (Brightness is Adjustable)
04 Static Green (Brightness is Adjustable)
05 Static Yellow (Brightness is Adjustable)
06 Static Cyan (Brightness is Adjustable)
07 Static White (Brightness is Adjustable)
08 Three Color Flash (Brightness and Speed are Adjustable)
09 Seven Color Flash (Brightness and Speed are Adjustable)
10 Three Color Fade (Speed is Adjustable)
11 Seven Color Fade (Speed is Adjustable)
12 Three Color Running (Brightness and Speed are Adjustable)
13 Red Flash (Brightness and Speed are Adjustable)
14 Blue Flash (Brightness and Speed are Adjustable)
15 Purple Flash (Brightness and Speed are Adjustable)
16 Green Flash (Brightness and Speed are Adjustable)
17 Yellow Flash (Brightness and Speed are Adjustable)
18 Cyan Flash (Brightness and Speed are Adjustable)
19 White Flash (Brightness and Speed are Adjustable)
20 Red/Blue Fade (Speed is Adjustable)
21 Blue/Green Fade (Speed is Adjustable)
22 Green/Red Fade (Speed is Adjustable)
23 Fade out and in (Speed is Adjustable)
24 Random Flash (Speed is Adjustable)
25 Auto cycles 1-24 (Speed is Adjustable brightness on some modes)
uses standard 12v doorbell battery in remote control
Additional Information
Product Highlights | Similar to our 6key but with pause and mode up and down |
---|---|
Led Color | RGB |
Mounting Options | Wall Mount |
Voltage | 12v |
Wattage | 48 |
Power Rating Max Amps | 4A/Ch |
Output Power | 12A 192 Watts Total all channels |
Number Of Chanels | 3 |
Rated Amps / Ch | 4A/Ch |
Power Input: Connection Type, Voltage, Amperage | Screw Terminal 12v DC |
Output Connection Type | Screw Terminal |
Can Power/Control (xx) Feet of strip | Can control 64' of our 12V RGB Flex Strip. |
Controllable By | RF Remote (can go through walls) 8x button |
Number Of Control Modes | 25 Modes |
Mode/Button Decription | 01 Static Red (Brightness is Adjustable) |
Steps of Speed Adjustment | 100x steps |
Dimmable Range / Steps | 0-100% in 256x steps |
Product Size (L)x(W)x(H) | (Receiver L121ΧW75ΧH25 mm) (Remote L90ΧW38ΧH17mm) |
Comes With | Reciver, Remote and Battery |
Suggested Accessories | Male power connector for connecting to our power supplies |
Available Options (may not be in stock) | with built in mic for audio flash mode |
Available Options | can get in 6/12/24v |