RGB Digital Point Modules Round
These are the Digital modules that can be controlled with computers and other DMX/Digital Controllers or stand alone SPI Controllers. The advantage of digital modules is that you can control each section by itself so you can make chasing effects and other patterns. These color changing LED modules are very easy to use and install, They are much brighter and longer-lasting than traditional rope light.
You can order them by the peice or if you order 20 you will get a complete set with connectors on the ends (20 of them make up a string just over 6ft long). The LED type used are the 5060 type super bright 3 in 1 SMD LEDs. There are 3 per module. They run on 12V DC. They are coated with a waterresistant coating so they can be exposed to light weather. ~ they are very easy to work with!
Details / Options
~~These RGB strips can change any color with the use of a controller/DMX so you will need a controller designed to control the 6803 chip or use standard DMX and a DMX to LPD6803/D705 Converter.
These Strips come with a male power connector on one end and data connector on both ends, if you order less then 20 peices you can splice the 4 wires to your other strips or to a controller, if you get 20x the power connector would plug into our power supplies or your 12V source and the 3 data wires (GND, CLK, DATA) will connect to the privous strip, SPI Conrtroller or the DMX to LPD6803/D705 Converter.
~~If you need help designing your lighting or are not sure how to wire, please check out our How to Install section. If your questions are not answered there, please contact us we would be glad to help!
~~The 12 watt Power Supply (can control up to 15x of these modules) or the 48 watt Power Supply(can control up to 64x of these modules) the 72 watt (can control up to 100x of these modules)~ these are based on the rated power draw~ you may be able to get longer runs than this on a power supply but we can not guarantee it).
|Length Of Strip||(modules are every +/- 3.75" on center) or if you order 20x they are 6' (73") for a full section with connections on each end|
|Cuttable Every||+/- 3.75"|
|# of LEDs / Meter||10 modules|
|Type of LED||5060 SMD|
|Viewing Angle (Degrees)||120 deg|
|Mounting Options||Double Sided Tape, Ceiling Mount, Wall Mount|
|Waterproof Rating||IP-65 (can get wet but not recommended for wet locations)|
|Wattage||.72 watts per module|
|Power Usage Watts / Foot: Rated (Actual)||2.5 Watts/Foot|
|Number Of Chanels||3 ch each module or each 20 module strip will use 60 (20x RGB) DMX channels|
Black = 12v (-)
If your modules have all white wires
|Max Connected Strip Length From Each Power Connection||With the digital strips you will need a wire running from the power supply to the start of each section|
|Controllable By||DMX 6803 Decoder or Digital Controller|
|Product Size (L)x(W)x(H)||The diameter of the round cap is 1.299in (33mm) or 1.408in (36mm) if you count the wings|
|Strip Width||base width1.52" (38.5mm)|
|Strip Thickness||base length1.52" (38.5mm)|
if you order individual modules they will have 1.1" wire on both sides of the module