Welcome To usLEDsupply!

12V RGB Flexible LED Strip 16' Roll (Digital Point Control) IP-67 (6803 Chip)

Be the first to review this product

Availability: In stock

$160.00

Quick Overview

Digital RGB Flexible Led Strip

12v RGB Flexible LED Strip 16' Roll (Digital Point Control)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)
  • 12v RGB Flexible LED Strip 16' Roll (Digital Point Control)

* Required Fields

$160.00

Details

RGB Flexible Digital LED Strip
These are the Digital strips that can be controlled with computers and other DMX/Digital Controllers. The advantage of digital strips is that you can control each 4.9" section by itself so you can make chasing effects and other patterns. These color changing LED strips are very flexible, bright, and easy to install!  They are much brighter and longer-lasting than traditional rope light. 

Each roll of flexible LED strip is 16' long (actually 16'-5" or 5 meters with wire on each end).  The LED type used are the 5060 type super bright 3 in 1 SMD LEDs.  There are 120 per 16' roll.  They run on 12V DC.  The waterproof rating is IP-65, which means that these flexible LED strips are water resistant.  ~ they are very easy to work with!

Details / Options
~~These RGB strips can change any color with the use of a controller/DMX so you will need a controller designed to control the 6803 chip or use standard DMX and a DMX to LPD6803/D705 Converter

These Strips come with a male power connector on one end and data connector on both ends, if you need custom lengths we can pre-solder power connector and 3 wires for the data onto the strip at the lengths you need, the power connector would then plug into our power supplies or your 12V source and the 3 data wires (GND, CLK, DATA) will connect to the previous strip or the DMX to LPD6803/D705 Converter.


~~If you need help designing your lighting or are not sure how to wire, please check out our How to Install section.  If your questions are not answered there, please contact us we would be glad to help!
~~The 12 watt Power Supply (can control up to 6' of this flexible LED strip) or the 48 watt Power Supply(can control up to 24' of this flexible LED strip)  the 72 watt (can control up to 36' of this flexible LED strip)~ these are based on the rated power draw~ you may be able to get longer runs than this on a power supply but we can not guarantee it).


~~Comes with a copper backing like our waterproof flexible LED strips.

For a video of these strips in action Click Here




Additional Information

Suggested Uses

House Outlines
Video Walls
Hallways
Other Lighting Effects

Led Color RGB
Length Of Strip 5 Meters/Reel 16'-4" long rolls
Cuttable Every 4.9" 124mm
# of LEDs / Meter 24
# of LEDs / Reel 120x 5060 SMD Leds / Reel (spaced 1.66in 42mm apart on center)
Type of LED 5060 SMD
Viewing Angle (Degrees) 120 deg
Mounting Options Double Sided Tape, Ceiling Mount, Wall Mount
Waterproof Rating Water Resistant (in silicone tube)
Voltage 12v
Wattage 2 Per Foot
Power Usage Watts / Foot: Rated (Actual) 2 Watts/Foot
Power Usage in Amps: Rated (Actual) 2.4A / Reel
Number Of Chanels each strip will use 120 (40x RGB) DMX channels
Connections Input/Output this will not work with our Solder-less Splice Connectors
Max Connected Strip Length From Each Power Connection With the digital strips you will need a wire running from the power supply to the start of each reel
Controllable By DMX 6803 Decoder or Digital Point Controller
Strip Backing Color Copper Backing
Strip Width bare strip (.47") with silicone tube (.57") 15mm
Strip Thickness .17" (4.6mm)
Comes With 12" wire on both ends with round 4 pin connector

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.